Post-Construction Cleaning COmpany · DFW
Post-Construction Cleaning Services in Dallas-Fort Worth
The final clean is the last thing standing between your build and turnover. We handle the final detail clean and the punch-list touch-up, get the space inspection-ready, and hand you a documented record for closeout.
Your contact information
We look forward to receiving your request for a quote. Please consider filling the information below and we will be in contact with you immediately.
Digital Log Every Visit
Timestamped, emailed same night
Immediate Issue Resolution
Every issue closed same day
Quality Verified
Quality verified by supervisor
Dedicated Point of Contact
Named supervisor per facility — not a call center
In short:
Post-construction cleaning is the detailed cleanup that clears construction dust, debris, and residue so a finished space is safe, presentable, and ready for final inspection. It runs in phases: a rough clean during the build, a final detail clean after finishes go in, and a touch-up after the punch list. Craddock’s Cleaning Services handles the final clean and the touch-up for commercial projects across Dallas-Fort Worth, gets the space inspection-ready, and documents the work for your certificate of occupancy and turnover package.
Construction dust doesn’t leave when the crews do
A finished building looks done, and it isn’t. Fine drywall and concrete dust settles into every horizontal surface, then lifts the first time the HVAC runs and lands on everything you just wiped.
That’s why a single rushed pass fails, and why the inspector finds a film on the window sills after the site got called clean. Dust migrates. A final clean has to account for the dust that’s still moving, which a one-day wipe-down never does.
So we don’t hand a space back after one pass on a dusty building. We clean top-down, let the system run, and come back to whatever resettled. That’s the pass that survives a walkthrough.
The three phases, and the two we own
Construction cleaning runs in three passes. We handle the last two, where the building has finishes to protect and an inspection to pass.
Phase one
Rough clean
Happens mid-build, after the major debris is hauled and before finishes go in. Usually the GC’s trades, not us.
GC scope
Phase two
Final clean
The detailed clean once finishes are installed is the complete pass after new construction, renovation, or remodeling work. Dust off every surface top to bottom, residue and stickers off glass and fixtures, floors brought up by type, vents and high ledges included. HEPA filter vacuums are part of the equipment for vacuuming fine dust from floors, carpets, and vents. Microfiber cloths are used on delicate glass and similar areas to clean surfaces without scratching. This is the pass that has to survive the inspector.
Craddock’s Own This
Phase three
Touch-up
After the punch list is worked and the construction project is complete, trades often come back through and leave fresh dust and marks before the space is handed over. We return for a final touch, so you can open the doors or turn the space over in pristine condition and get it signed off.
Craddock’s Own This
We’re straight about the line. If the rough clean during active construction belongs with your own crew, we’ll say so instead of quoting work that isn’t ours to do well.
What the final clean covers
Detail work, top to bottom, on a building that has never been cleaned before. Everything below gets its first real pass after renovation or construction services are finished, which is where post construction cleaners come in. Each property presents unique challenges, so the crew must perform a meticulous cleaning to treat surfaces safely and efficiently.
- Construction dust, ceilings to floors
- Vents, ledges, high surfaces
- Glass: labels, stickers, adhesive, overspray
- Light fixtures & fans
- Outlets, switch plates, trim, hardware
- Cabinets & millwork, inside and out
- Restrooms & fixtures, first full clean
- Floors by type, haze and film removed
- Door tracks, window channels, stair nosings
- Protective film & packaging removal
- Final debris staged for haul-off
Exterior cleanup can also include driveways, walkways, and other areas when included in scope.
On walls: we spot-clean scuffs, handprints, and adhesive, matched to the paint finish so we don’t burnish flat paint or lift it. Not a full wash, unless the finish allows it.
Floors are where a final clean earns its keep
New tile shows up with grout haze and thinset smears. Polished concrete arrives under a layer of dust and cure residue, and vinyl and hardwood ship beneath a protective film that has to come off clean. Each surface takes its own method. The wrong one leaves a floor the owner notices on day one, so our floor work is matched to the finish, and what gets handed over is the floor the architect specified.
Built for closeout
Clean to the inspection, not just to the eye
Your final inspection isn’t only about the mechanicals. The building code ties the certificate of occupancy to a clean, debris-free site, and the fire marshal wants egress clear with no combustible debris left behind. A clean that photographs well but leaves dust in the sills can still stall a sign-off.
So we clean to what the inspection checks, and we write it down. Reliable trained technicians are essential for safety and consistent inspection-ready results. Every final-clean and touch-up visit produces a photo-backed digital log through CleanProof: area, date, condition at handoff. That record drops straight into your closeout package, and it settles a “was this actually cleaned” question before it turns into a punch-list item.
We also flag what we spot. A scratched pane, a leaking fixture, a floor marred after our pass, called out while there’s still time to fix it, instead of leaving it for the walkthrough to find, and that expertise helps catch issues before walkthrough.
Debris and waste
Where our scope ends
Straight answer up front, because it’s the part that causes friction on a job site if nobody says it.
How we work
- Standard construction debris from the final clean, staged so the proper party can dispose of it through licensed or city-franchised haulers
- OSHA housekeeping for clean, dry, safe surfaces and clear routes while other trades are still on site
- Safety data sheets on site for every product we bring into the building, with eco-friendly options such as Certified Green Chemicals available on request to help protect the environment
What we won’t do
- Disposal of hazardous waste, paints, solvents, and treated materials regulated under federal hazardous-waste rules remains the GC’s stream, and the GC is responsible for that disposal.
- Structural debris and dumpster haul-off during active construction, before the final clean, though additional cleaning may still be needed before final handoff.
Our quality System
CleanProof on every visit
CleanProof is why our clients stop checking behind us: it reflects a reliable cleaning business with the knowledge and resources to document every visit. When comparing providers, look for companies that are bonded and insured. Scope gets confirmed in writing, the crew gets briefed, a supervisor inspects against the checklist, the digital log goes out the same night, and anything flagged comes back to you closed. On a construction job, that log is the photo-backed record you hand to the owner and the inspector, instead of a promise you have to vouch for yourself.
See Our Quality Control System →Construction Projects we clean
Construction types across DFW
Every finished commercial build needs a final clean before someone takes the keys, whether it’s for a homeowner or a business owner wrapping up a finished project. These are the ones we’re on most.
Office Buildings
Tenant improvements and full office build-outs, cleaned for move-in day
Medical & dental build-outs
New clinics and suites brought to a clinical standard before opening.
Warehouse & industrial
Ground-up and expansion projects, from slab dust to final detail.
Hotel & hospitality
New builds and renovations turned over ahead of the first guest.
School & campus
Summer and phased construction cleaned before students return.
Government & public
Civic buildings detailed for final inspection and opening day.
Across different construction sites, we handle new construction, renovating, and restoration work. Focus on providers with proven post-construction experience and strong customer-service reviews.
The final clean leans on our floor detail work and glass and window detail, pairs with deep cleaning for a full reset, and rolls into ongoing janitorial service once the building is occupied. Further reading: the three phases explained and what a final clean includes.
Send us the closeout date and we will take it from there
Give us the square footage, the finish level, and the date you need to hand it over. We’ll build the final clean and touch-up around your inspection, and hand you the record when it’s done.
Your contact information
We look forward to receiving your request for a quote. Please consider filling the information below and we will be in contact with you immediately.
100% satisfaction guarantee: not happy with the work, we re-clean at no extra cost. Call within 24 hours of the visit to qualify.
Coverage
Serving the DFW Metroplex
We clean finished commercial projects across Dallas, Fort Worth Metroplex. We’ve held a 95% client retention rate by earning the next job instead of locking it in.
Questions we get
